Please execute common calibration.Please execute common calibration.Cause Corrective ActionThere is not even one Common calibration execution result.Note that this is displayed when all of the following are satisfied.• If Set Exec. Guide is On in the Control Panel menu.• If the printer is loaded with a type of paper on which color calibration cannot be executed.Execute Common calibration.(See "Color Calibration Using the Printer Sen-sor.") → P.830Set Set Exec. Guide to Off on the Control Pan-el menu.(See "Menu Structure.") → P.667Please commn calibrt using above paper.Please commn calibrt using above paper.Cause Corrective ActionIt is now recommended that you execute Common calibration.Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following istrue.• If the printer is loaded with a type of paper on which color calibration cannot be executed and the predefined con-ditions since executing the Common calibration the last time have been reached.• Although a media type that color calibration can be executed on is loaded in the printer, there is no record orperforming color calibration on that media, and the designated criteria from executing Common calibration the lasttime have been reached.Execute Common cali-bration.(See "Color CalibrationUsing the Printer Sen-sor.") → P.830Set Set Exec. Guideto Off on the ControlPanel menu.(See "Menu Struc-ture.") → P.667Please calibrate using above paper.Please calibrate using above paper.Cause Corrective ActionIt is now recommended that you execute Unique calibration.Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following istrue.• If the printer is loaded with a type of paper on which color calibration can be executed, but there is no record ofhaving executed color calibration on that paper or a record of having executed Common calibration other any othertype of paper.• If the printer is loaded with a type of paper on which color calibration can be executed, there is a record of havingexecuted color calibration on that paper, and the predefined conditions since executing the color calibration the lasttime have been reached.Execute Unique cali-bration.(See "Color Calibra-tion Using the PrinterSensor.") → P.830Set Set Exec. Guideto Off on the ControlPanel menu.(See "Menu Struc-ture.") → P.667Borderless printng not possible. Paper stretched or shrank.Borderless printng not possible. Paper stretched or shrank.Cause Corrective ActionThe loaded roll has expanded or contracted due to environmental conditions,making it wider or narrower than the supported width for borderless printing.Press the OK button to stop printing.Use each type of paper only where the recommended environ-mental conditions are met. For details on environmental condi-tions for various paper, see the Paper Reference Guide.(See "Paper Reference Guide.")Before borderless printing, move the blue platen switch.Before borderless printing, move the blue platen switch.Cause Corrective ActionThe blue Switch on the platen was set to the side opposite ● whena borderless print job was received.Before borderless printing, set the blue Switch on the platen to the ● side.(See "Setting the Blue Switch on the Platen.") → P.974iPF8400 Please execute common calibration.User's GuideError Message Messages regarding printing or adjustment1005