e Arrow buttons• ◀ buttonPress this button on the Tab Selection screen to move to another tab.In menu items requiring numerical input, press this button to move to another digit.• ▲ buttonPress this button when viewing menus to display the next menu item or setting value.• ▶ buttonPress this button on the Tab Selection screen to move to another tab.In menu items requiring numerical input, press this button to move to another digit.• ▼ buttonPress this button when viewing menus to display the next menu item or setting value.f OK buttonPress this button on the Tab Selection screen to display the menu of the tab shown.Pressing this button in menu items of each tab for which is displayed at left will move to the lower level of themenu item, enabling you to execute menu commands or set menu values.Also press this button if the Display Screen indicates to press the OK button.g Stop buttonCancels print jobs in progress and ends the ink drying period.h Power button (green)Turns the printer on and off. (See "Turning the Printer On and Off.") →P.23The Power button is lit when the printer is on or in Sleep mode.i Navigate buttonEnables you to check instructions for loading and removing paper or replacing ink tanks or printheads, as well asother operations. (See "How to View Instructions With Navigate.") →P.659j Back buttonDisplays the screen before the current screen.k Cut buttonPressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in CuttingMode in the Control Panel menu. (See "Specifying the Cutting Method for Rolls.") →P.552l Feed buttonPressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper Manual-ly.") →P.549m Load buttonPress this button when loading or replacing paper.(See "Loading Rolls in the Printer.") →P.539(See "Loading Sheets in the Printer.") →P.561n Roll Media lamp (green)Lit when rolls are selected as the paper source.o Cut Sheet lamp (green)Lit when sheets are selected as the paper source.Note• To recover from Sleep mode, any button can be pressed on the Control Panel.iPF8400 Control PanelUser's GuideControl Panel Operations and Display Screen655
