• Auto Arrange SpacingChange the object-to-object spacing to be applied in the operation of laying out objects automatically.Note• You can input between 0.0 and 100.0(mm) (between 0.00 and 3.94(inch)).• You can change the numbers by clicking either ▲ button or ▼ button.Page Setup Dialog BoxPage Setup Dialog BoxThis dialog box appears when you select Page Setup from the File menu.This dialog box provides selections for set-ting the media size, orientation and other important features.• Paper OrientationThis selects the paper orientation.The following settings are available for orientation.Setting DetailsVertical Prints the image and text created with the application software in the orientation as it is.Horizontal Prints the image and text by rotating sideways 90 degrees from the orientation as specified in theapplication.• Roll Paper LengthSet the length of one page to print on roll paper.When you place a checkmark on Auto Settings, the one-page length to be printed on roll paper is automaticallyset so that the laid-out objects are printed on one page.Note• Available only if rolls are selected in Paper Source.• You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).• You can change the numbers by clicking either ▲ button or ▼ button.• OrderSet the object layout order.The following settings are available for order.Setting DetailsUpper Left to Right The objects are laid out from upper left to right.Upper Left to Bottom The objects are laid out from upper left to bottom.Page Setup Dialog Box (Mac OS X) iPF8400User's GuideMac OS X Software Free Layout438
