• The Power Lamp and Message Lamp are not lit (even once), and nothing appears on theDisplay ScreenMake sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.• No paper is loadedLoad paper. (See "Loading and Printing on Rolls.") ➔P.18 (See "Loading and Printing onSheets.") ➔P.21Turning the printer offImportant• Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.1 Make sure no print jobs are in progress.If the Message Lamp is flashing, check the message on the Dis-play Screen and take action as necessary. (See "Error Messag-es.") ➔P.598If the Data Lamp is flashing, the printer is receiving a print job.Turn off the printer only after printing is finished.2 Hold down the Power button for more than a second.After "Shut Down.. Please Wait.." is shown on the DisplayScreen, the printer shuts off.Loading and Printing on RollsLoading and Printing on RollsThese are the basic steps for loading and printing on rolls.Follow these steps to load and print on rolls.Note• For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "PaperSizes.") ➔ P.328 (See "Types of Paper.") ➔ P.328• If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate automaticcutting and cut the paper manually. (See "Specifying the Cutting Method for Rolls.") ➔ P.351Loading and Printing on Rolls iPF785User's GuideBasic Printing Workflow Printing procedure18
