Item Details Default SettingDNS Host Name Specify the printer host name, up to 63 characters (1–63 characters). Usesingle-byte letters, numbers, and - (hyphens). Do not use numbers or - forthe first character or - for the last character.NB-18GBipxxxxxxDNS Domain Name Specify the printer domain name, up to 63 characters. Use single-byte let-ters, numbers, - (hyphens), and . (periods). Do not use numbers, -, or . forthe first character, or - or . for the last character.blankMulticast DNS Serv-ice NameSpecify the printer's Multicast DNS service name. (1–63 characters)This name will be displayed when Bonjour functions are used.Canon iPFxxxx(xxxxxx)6 Click OK to display the Network page.Note• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supportssuch protocol running in the network.• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this methodis used first. If you cannot obtain the IP address, the address specified in IP Address is used.• It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearingcheck boxes of options you will not use.• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serversand DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS DomainName, respectively.When using an IPv6 IP address1 Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-teUI page.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2 Select Administrator Mode and click Logon.Note• If a password has been set on the printer, enter the password.3 Click Network in the Device Manager menu at left to display the Network page.4 Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settingspage.5 Refer to the TCP/IPv6 Settings Items table to complete the settings.TCP/IPv6 Settings ItemsItem Details Default SettingUse IPv6 Activate to enable IPv6. OffUse DHCPv6 Activate when using a DHCPv6 server to acquire the IP ad-dress.OffUse a stateless address Activate when using an IPv6-compatible router to acquire theIP address.OnUse a manual address Activate when configuring the IP address manually. OffIP Address Enter the printer's IP address. ::Prefix Length Enter the IP address prefix length. 0Default Router Ad-dressEnter the default router address. ::Prefix Length Enter the prefix length of the default router address. 0Primary DNS Server Address Specify the IP address of the primary DNS server. ::iPF785 Configuring the Printer's TCP/IP Network Settings With RemoteUIUser's GuideNetwork Setting Initial Settings455
