Print job storage capacity Personal Boxes 100 jobsInterfaceUSB Format Internal portMode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transferConnector Series B (4-pin)Ethernet Format Internal portSpecification IEEE 802.3 10Base-T,IEEE 802.3u 100Base-TX/Auto-Negotiation,IEEE 802.3ab 1000Base-T/Auto-Negotiation,IEEE 802.3x Full DuplexIEEE 802.3az EEEProtocols SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)InkFor information on the ink the printer supports, see "Ink Tanks." ➔P.536PaperFor information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displayingthe Paper Reference Guide.") ➔P.331Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔ P.328Minimum paper length Rolls 203.2 mm (8.0 in)Sheets 279.4 mm (11.0 in)Maximum printable length (*1) Rolls 18 m (19.7 yd)Sheets 1,600 mm (63.0 in)Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)Sheets 0.07–0.8 mm (0.0028–0.031 in)Roll maximum outer diameter 150 mm (6 in) or shorterSupported paper core inner diameter 2 inches / 3 inchesPrint area For details, see "Print Area." ➔ P.621*1: Varies depending on the operating system or application.Roll Holder Set Roll Holder Set RH2-33Print AreaPrint AreaA margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-less printing, the actual printing area corresponds to the paper size minus the space for this margin.Note• Printable Area: The area that can be printed.• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.• Recommended Print Area: We recommend printing within this area.• To print so that your original matches the print area exactly, use an oversized paper size that includes the requiredmargin. (See "Printing on Oversize Paper.") ➔ P.70Margins of Printable Area Margins of Recommended Print AreaTop Edge Bottom Edge Sides Top Edge Bottom Edge SidesSheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)iPF785 Print AreaUser's GuideSpecifications Printer Specifications621
