134 6H4866-02Loader Pusher Adjustment[1] Remain in Settings>Diagnostics tab.[2] Click on the Erase Lamps to light the Erase Lamps.Diagnostics Screen -activate erase lamps[3] Insert the Trolley Roller Gauge into the tray entrance so that it will be between the pusher and the top roller.The Go side (0.3mm) should pass through smoothly, the No Go side (0.4 mm) should not pass through.Inserting the Trolley Roller[4] If the pusher height is incorrect, remove the bottom access cover, loosen the motor frame retaining screws andadjust the frame position as necessary. (See “Replacing the Stepper Motor” on Page 65NoteThe adjustment can be performed with or without the Tray Assembly installed.[5] Repeat Step 3 to verify adjustment.
