Carrier Touch Pilot Control Series Control Manual

Unit start/stop screen (operating modes)Local On Local On: The unit is in the local control mode andallowed to start.Local Schedule Local Schedule: The unit is in the local control modeand allowed to start if the period is occupied.Network Network: The unit is controlled by network commandsand allowed to start if the period is occupied.Remote Remote: The unit is controlled by external commandsand allowed to start if the period is occupied.MasterMaster: The unit operates as the master in the master/slave assembly and allowed to start if the period isoccupied.To start the unit• Press the Start/Stop button.• Select the required Machine Mode.• The Welcome screen will be displayed.To stop the unit• Press the Start/Stop button.• Confirm the unit shutdown by pressing Confirm Stop orcancel the unit shutdown by pressing the Back button.The bell located in the upper-right part of the screen lightswhen any fault is detected (see section 9.1).6.5 - Display settingsThe User Login screen allows the user to do any of the following:- Select the language of the controller.- Change the system of measurement (imperial or metric).- Gain access to more control options.To access the User Login screen, press the Login button in theupper-right corner of the Synoptic screen.Legend1. Cursor indicating the selected language2. Logged-in button3. Logged-off button4. Password dialog box5. System of measurement: Metric/Imperial6.6 - Display languageDisplay language can be modified in the User Login Screen onthe user interface.To change a display language• Press the Login button to open User Login Screen.• Select the new language of the display.• Press the Logged-in button to save your changes or theLogged-off button to exit the screen without makingmodifications.The control system allows users to add new languages to thecontrol. To learn more about language customization, pleasecontact your local service representative.6.7 - System of measurementThe control offers the possibility of selecting the system ofmeasurement displayed on the user interface (metric / imperial).To change a system of measurement• Press the Login button to open User Login Screen.• Select the system of measurement (metric or imperial).• Press the Logged-in button to save your changes or theLogged-off button to exit the screen without makingmodifications.6.8 - User loginOnly logged-in users can access configurable unit parameters.By default, user password is “11”.To log in as user• Press the Login button to open User Login Screen.• Press the Password box. A dialog box appears.• Provide the password (11) and press OK.• The User Login screen appears.• Press the Logged-in button to save your changes or theLogged-off button to exit the screen without makingmodifications.NOTE: You may also leave the User Login screen by pressingthe Back button. Your changes will be saved.Security access settings- User-level security ensures that only authorised usersare allowed to modify critical unit parameters.- Only logged-in users are allowed to access theConfiguration menu.- It is strongly recommended to change the defaultpassword of the user interface to exclude the possibilityof changing any parameters by an unqualified person.- Only people qualified to manage the unit should befamiliarized with the password.6.9 - Password changeUser password can be modified in the User Configuration menu.To change your password• Go to the Main Menu.• Navigate to the Configuration menu (logged-in users only)and select User Configuration (USERCONF).• Select the User Password box and provide the newpassword.• Press OK. The User Configuration screen appears.• Press the Save button to save your changes or the Cancelbutton to exit the screen without making modifications.(1)(2) (3)(4)(5)6 - SETTING UP TOUCH PILOT CONTROL12