Carrier Touch Pilot Control Series Control Manual

6 - SETTING UP TOUCH PILOT CONTROL6.10 - Main menuThe Main menu provides access to the main control parameters,including general parameters, inputs and outputs status, etc.• To access the menu, press the Main menu button locatedin the upper-left part of the Synoptic screen.• Specific unit parameters can be accessed by pressing theicon corresponding to the desired category.• To go back to the Synoptic screen, press the Home button.General parameters screenThe General parameters screen provides access to a set of generalunit parameters.• To access the General parameters screen, go to the Mainmenu and select General Parameters (GENUNIT).• Press the Up/Down buttons to navigate between thescreens.Legend1. Forceable point (see section 6.12)6.11 - Configuration menuThe Configuration menu gives access to a number of user-modifiable parameters such as pump configuration, schedulemenu, etc. The Configuration menu is password-protected.• To access the Configuration menu, press the Main menubutton located in the upper-left part of the Synoptic screen,and then find and press Configuration Menu.• Press the field corresponding to the parameter to bemodified and introduce all the necessary changes.• Press the Up/Down buttons to navigate between thescreens.• Once all the necessary modifications have been made,press the Save button to save your changes or the Cancelbutton to exit the screen without making modifications.6.12 - System configuration overrideIn some cases it is possible to override system configuration.The override screen provides the option to issue the commandoverriding the current operation of the unit.• To access the override screen, press the forceable point ofthe data screen. Note that not all parameters can beoverridden by the control.Legend1. Set force2. Auto (force removed)3. Forced value(1)(1) (2)(3)13