Casio keyboard PX-320 User Manual

Also see for Privia PX-320: Implementation guide

Contents

Casio keyboard PX-320 User Manual Manual pdf 14 page image

E-12Selecting and Playing a ToneUse the following procedure to layer two tones, so theysound at the same time. The tone you specify first iscalled the “main tone”, while the tone you specifysecond is called the “layered tone”.1. While holding down the TONE button of thetone that corresponds to the main tone, pressthe button that corresponds to the layeredtone.Example: While holding down the GRAND PIANO(CLASSIC) button, press the SYNTH-VOICEbutton.NOTE• If you use the VARIOUS/GM TONES button to assigneither of the above tones, the tone currently assigned tothe VARIOUS/GM TONES button will appear on thedisplay while the button is depressed. Note that adifferent tone number appears depending on whetheryou press the VARIOUS/GM TONES button first (toassign it as the main tone) or second (to assign it as thelayered tone).• While you are holding down the VARIOUS/GMTONES button and its tone number is displayed, youcan change the currently assigned tone using the T/NOand S/YES buttons.2. To unlayer the keyboard, press any one ofthe TONE buttons.NOTE• You can adjust the balance between the main tone andlayered tone. See “Other Settings” on page E-32 for moreinformation.• You cannot layer the keyboard while in the Duet Modeor when recording to Track 2 on the digital piano.You can assign different tones to keys on the left side(low range) and the right side (high range) of thekeyboard.1. Press the TONE button of the tone you wantto select for the high range.Example: GRAND PIANO (CLASSIC)2. Press the SPLIT button.• This will cause the SPLIT lamp to light.3. Press the TONE button of the tone you wantto select for the low range.Example: STRINGS4. After you are finished using the splitkeyboard, press the SPLIT button again tounsplit it.• This will cause the SPLIT lamp to go out.NOTE• You can configure the keyboard so it is layered with twotones in the high range. To do this, first perform the layeroperation in the left side of this page. After that, split thekeyboard as described above.• You cannot split the keyboard while in the Duet Mode orwhen recording to Track 2 on the digital piano.Layering Two TonesGRAND PIANO (CLASSIC)SYNTH-VOICESplitting the Keyboardbetween Two TonesSTRINGS GRAND PIANO (CLASSIC)Low range High rangeSplit point