Playing Back Built-in SongsE-23The Music Library includes both built-in songs (01 to60), plus up to 10 songs (61 to 70) that have been savedto digital piano memory from a computer* or SDmemory card (page E-41). You can use the procedurebelow to select one of these songs and play it back.* You can download music data from the Internet andthen transfer it from your computer to digital pianomemory. See “Expanding the Selections in the MusicLibrary” on page E-40 for more information.1. Press the MUSIC LIBRARY button so thelamp below the button is lit.• Each press of the button toggles between the upperlamp and lower lamp.• This will cause the currently selected song number toappear on the display.2. Find the song number of the song you want toplay in the Song Llist on page A-5.3. Use the T/NO and S/YES buttons to selecta song.4. Press the PLAY/STOP button.• This starts the playback of the song.• The measure number appears on the display duringplayback.• To view the song number during playback, holddown the MUSIC LIBRARY button.• While playback is in progress, you can press theT/NO and S/YES button to change to another song.5. Press the PLAY/STOP button again to stopplayback.• Playback will stop automatically when the end of thesong is reached.NOTE• You can change tempo, volume, and pre-count settingsfor playback. See “Other Settings” on page E-32 for moreinformation.To skip back through a song1. While playback is in progress, hold down theREW button.• This skips back through the song measure-by-measure.• The measure number appears on the display whileyou are skipping back.2. When you reach the point you want, releasethe REW button to resume playback.NOTE• Depending on what is being played when you press theREW button, the skip back operation may not start rightaway when you press.Playing Back a Specific MusicLibrary SongMeasure numberMeasure number