Saving Digital Piano Setups (Registration Memory)E-271. Press the TONE/REGISTRATION button sothe registration lamp is lit.• This will cause the currently selected bank number toappear on the display.• Each press of the button toggles between the upperlamp and lower lamp.2. Use the T/NO and S/YES buttons to displaythe number of the bank that contains the areayou want to recall.3. Press the area button (1 through 12) for thearea whose registration data you want torecall.• The lamp of the applicable area button will light afterrecall is complete.Example: After data has been recalled from area 3-1NOTE• Registration data cannot be recalled when any one of thefollowing conditions exists. Eliminate the problemcondition and perform the procedure from step 1.• The digital piano is in the Duet Mode.• RECORDER button PLAY lamp is flashing.• To check the current selected song or rhythm numberwhile a bank number is on the display, press theRHYTHM, MUSIC LIBRARY button or CARD button.To recall a setup fromregistration memory
