DVTEL CT-5322F User And Installation Manual

Also see for CT-5322F: Quick installation guide

Contents

DVTEL CT-5322F User And Installation Manual Manual pdf 34 page image

CT-5322F/CT-5642F User and Installation Guide20The user role (class) determines the access to the different menus and actions that can be performed fromthe unit’s web interface. The following table details the privileges for each user role (class) by menu screen:Screen Description PrivilegeView Live video and image controls Administrator, Operator, Viewer (canonly view the video stream)AnalyticsConfiguration of analytic depth setings, rules,responses, scheduled actions, on-screendisplay, firmware version selection, andfirmware/configuration backup and restoreAdministratorVideo Storage Recording and Storage of video and images Administrator, OperatorMaintenance System updates, camera reset, factory default,and camera functions AdministratorSetup IP network settings, user and accountmanagement and camera controls AdministratorUser privileges are configured from the Setup > Accounts screen. See Configuring Account Settings(page 53).7.1 View ScreenThe View screen is used to view live video and for configuring image controls. After logging in for the firsttime or loading a new firmware version, you must enable the ActiveX plug-in in order to view live video. SeeDiscovering the Camera on the Network. All users have access to the View screen. See Figure 24: Home Pagewith Thermal Image.Configure the following settings from the View screen from the menu above the View screen:Item DescriptionVideo Stream Select the video stream: H.264, MJPEG, or HTTP JPEG. You can select multiplevideo streams, which open in separate browser windows. HTTP JPEG isrecommended for: Accessing a unit that is located behind a firewall at a remote site Transmitting video via HTTP over remote networks with low bandwidth Remote configuration of the unit over the web If you have difficulty viewing the video in H.264Note:The ioi camera enables access to a camera that is not IP-enabled at aremote site over the Web. For more information about thiscapability, see Accessing a Remote Unit Behind a Firewall (page 62).Snapshot Click the icon to take a snapshot of the image.