Using the Web Interface51To authenticate the camera with 802.1X1. From the Setup > Network screen, select 802.1X. The 802.1X screen opens.Figure 59: 802.1X Screen2. Configure the following settings:Network Setting DescriptionEAP TypeFrom the drop-down list, select one of the following authentication options: Off – Do not use authentication EAP-MD5 EAP-GTC EAP-MSCHAPv2 EAP-TTLS PEAPv0-MSCHAPv2Note:EAP-MSCHAPv2, EAP-TTLS, and PEAPv0-MSCHAPv2require a certificate for authentication.Server Certificate Click Browse to locate the digital certificate (*.pem file) used toauthenticate the camera on the authentication server.Username Enter the username to unlock the private key in the camera certificate.Password Enter the password to unlock the private key in the camera certificate.3. Click Upload Certificate to upload the digital certificate to the camera.4. Click Save Changes to save the username and password.
