DVTEL CT-5322F User And Installation Manual

Also see for CT-5322F: Quick installation guide

Contents

DVTEL CT-5322F User And Installation Manual Manual pdf 53 page image

Using the Web Interface39Scenes with Large Objects or Many Objectsioi Thermal offers enhanced detection in scenes where there are large or multiple objects, and there ismovement in up to 80% of the frame. This function is enabled by default in the Advanced Settings area ofthe Analytics > Firmware screen. To deselect this function, uncheck the checkbox and click Apply.Enable Enhanced DetectionThe unit’s analytic firmware includes an algorithm that improves the distance from which smaller objects aredetected. This function is disabled by default. To enable this function, check the checkbox in the AdvancedSettings area of the Analytics > Firmware screen. To deselect this function, uncheck the checkbox and clickApply.7.2.7 Backup & RestoreThe Backup & Restore screen enables you to create backup files of the unit’s analytics settings and torestore them.Figure 43: Analytics > Backup & Restore ScreenTo back up the analytic firmware file1. Click Backup.To restore the analytic firmware file1. Do one of the following: To restore factory defaults, select To factory defaults. To restore all defaults from a stored file, select Full restore from file, click Browse to locate thefile path, then select the file. To restore analytic settings from a stored file, select Analytic settings from file, click Browse tolocate the file path, then select the file.2. Click Restore.Note:Analytics firmware is stored in a separate file than the camera system software. To backup andrestore the camera system software version, see Maintenance > System Update.Refer to the HTML Edition Units User’s Guide for detailed instructions on configuring these settings.