CT-5322F/CT-5642F User and Installation Guide54Date and Time SettingsThe Date and Time screen is used to set the current date and time.To configure date and time settings1. From the Setup > Camera screen, select Date and Time. The Date and Time screen opens.Figure 62: Date and Time Screen2. To configure the date and time settings, enter the following information:Field DescriptionNTP Server Enter the address for the NTP server.NTP Interval(Minute)Enter the number of minutes between requests for the time service tosynchronize with the unit.Enable NTP Select Yes or No.3. Click Save Changes.4. To configure the current date, time and timezone settings, enter the following information:Field DescriptionCurrent CameraLocal Date andTimeThis field displays the current local date and time. Click Refresh to updatethe date and time.Select a New Dateand TimeClick the text box to enter the date and time to manually override theNTP settings.Select Time ZoneFrom the drop-down list, select the local time zone. Daylight Savings Timeis enabled automatically by default when you select your time zone. Ifyou are located in an area that does not observe Daylight Savings Time,look for your region in the list.5. Click Refresh Time to update the current data and time settings.6. Click Set Date, Time and Time Zone to save the settings.Note:NTP must be disabled in order to save changes.
