Configuration and Operation25System ScreenThe System screen is used for entering the camera’s friendly name and date and time settings.Figure 20: System ScreenHost NameThe host name is for camera identification. If the alarm function is enabled and is set to send analarm message by Mail or FTP, the host name entered here is displayed in the alarm message. SeeEvents Setup.Time ZoneSelect the time zone from the drop-down list.Enable Daylight Saving TimeTo enable daylight saving time, check the Enable daylight saving time box. Then specify time offset(number of hours or minutes difference between daylight saving time and standard time). Theformat for time offset is [hh:mm:ss]. For example, if the amount of time offset is one hour, enter01:00:00 in the field. Finally, enter the start time for daylight saving time and end time for daylightsaving time.Time formatEnables a choice of formats: either year, month, and day (yyyy/mm/dd); day, month, and year(dd/mm/yyyy); or month, day, and year (mm/dd/yyyy).Sync with Computer TimeSelect this button to synchronize the camera’s date and time display with the PC. You can changethe PC date and time in the respective text box.