Configuration and Operation299.2.1.2.3 IEEE 802.1XThe IEEE 802.1X screen is used for enabling the camera to access a network protected by802.1X/EAPOL (Extensible Authentication Protocol over LAN). Users must contact the networkadministrator to obtain certificates, user IDs, and passwords.Figure 24: IEEE 802.1X/EAP-TLS ScreenCA CertificateThe CA certificate is created by the Certificate Authority for the purpose of validating itself. ClickBrowse to locate the certificate. Then click UPLOAD to check the server’s identity.Client Certificate/Private KeyClick Browse to locate the Client Certificate and Private Key. Then click UPLOAD to upload the ClientCertificate and Private Key to authenticate the camera.Settings Identity – Enter the user identity associated with the certificate. Up to 16 characters can beused. Private Key Password – Enter the password associated with the user identity. Up to 16characters can be used.Enable IEEE 802.1XCheck the box to enable IEEE 802.1X. The setting is disabled by default. Click SAVE to save the IEEE802.1X/EAPTLS setting.