32 Installation (for qualified installers only)© Travis Industries 6/19/18 - 1418 DaVinci-Cat2+Place Installation Alignment Tool in Center of Glass Opening and AdjustThe installation alignment tool is used to align the two fireplace modules so the glass opening is uniformin height. Single-Sided, Bay, and Side fireplaces use one alignment tool. Double-Sided, Pier, and Islandfireplaces use two alignment tools.To align the glass opening, place the alignment tool between the two modules. Use the wing nuts toexpand the support until it is tight. Measure the glass opening height on one side. Then measure wherethe two modules come together. This height should be identical. Use the wing nuts to expand thesupport as needed until the glass opening height is uniform. Do not remove the alignment tool until theTitan Lock connectors are fully tightened (see next page).Make sure the glass opening is the sameheight on both sides and middle. Usethe injstallation alignment tool to adjustthe height in the middle.
