Daikin ERLQ004CA Installer's Reference Manual

Also see for EHBH04CA: Operation manual Installation manual

Contents

Installer reference guide39 EHBH04+08 + ERLQ004~008Daikin Altherma - Low Temperature Split4P313774-1 – 2012.057 InstallationFrom the rear5 Reinstall the faceplate onto the wallplate.Fixation of the user interface to the wall in case of installation asroom thermostat1 Insert a screwdriver into the slots underneath the user interfaceand carefully separate the faceplate from the wallplate.2 Fix the wallplate of the user interface to wall.3 Connect the wires to the user interface as shown below.From the rearFrom the leftFrom the topFrom the top center4 Reinstall the faceplate onto the wallplate.7.6.7 To connect the shut-off valve1 Connect the valve control cable to the appropriate terminals asshown in the illustration below.2 Fix the cable with cable ties to the cable tie mountings.a Notch this part for the wiring to pass through with nippersetc.b Secure the wiring to the front part of the casing using thewiring retainer and clamp.NOTICEBe careful NOT to pinch the wiring when attaching thefrontplate to the unit.NOTICEThe PCB is mounted in the faceplate of the user interface.Be careful NOT to damage it.b aPCB1xb aPCB1xaPCBb1xa Notch this part for the wiring to pass through with nippersetc.b Secure the wiring to the front part of the casing using thewiring retainer and clamp.NOTICEWiring is different for a NC (normal closed) valve and a NO(normal open) valve.abPCBb1xaPCBbb1xX1MX2M5 6 7M2SX1MX2M5 6 7M2SNO NC