Troubleshooting by Error Code SiUS331604E213 Service DiagnosisTroubleshootingRefer to page 237.NONOYES Not available for combined use withremote control adaptor. Dismountthe remote control adaptor, andthen reset the power supply of allthe centralized controllers.Not available for combineduse of schedule timer andMaster Station III. Dismounteither, and then reset all thecentralized controllers.Not available for combineduse of schedule timer andDMF-IF. Dismount either,and then reset all thecentralized controllers.Dismount the Independent/Combineduse connector of the schedule timer,and then reset all the centralizedcontrollers.Integrate one unit for thecentralized controllerconnected with theconnector, and then reset allthe centralized controllers.Disconnect the setting connector of themaster centralized controller and connectit to a different centralized controller, andthen reset the power supply of all thecentralized controllers. If after this theerror is resolved, the centralized controllerconnected with the setting connector isfaulty. Replace the controller.YESYESDoes theschedule timerconnect?NONONONODoes theMaster Station IIIconnect?YESNODoes the DMF-IFconnect?YESNODoes the parallelinterface connect?YESYESYESCentralized controller: NormalMaster unit centralizedconnector setting tableCHECK 14Not available for combineduse of schedule timer andparallel interface. Dismounteither, and then reset all thecentralized controllers.CautionBe sure to turn off the power switch before connecting or disconnectingconnectors, or parts may be damaged.The remotecontrol adaptor (KRP2A series)is connected.Does theIndependent/Combineduse connector (CN1/X1A) of theschedule timer connect?Arethere two ormore centralizedcontrollers connected withsetting connectors(CN1/X1A)?Possibly caused by externalfactors (such as interference)related to other equipment.Reset thepower supply of all thecentralized controllers.MA error recurs?CHECK 14
