SiUS331604E Field Setting from Remote ControllerField Setting 802. Field Setting from Remote ControllerIndividual function of indoor unit can be changed from the remote controller. At the time of installation or afterservice inspection / repair, make the local setting in accordance with the following description.Wrong setting may cause error.(When an optional accessory is installed on the indoor unit, settings for the indoor unit may need to be changed.)2.1 Wired Remote Controller — BRC1E73, ,(1)(2)Press Menu/OK button.(3)(4)(5)(3)(5)Press Menu/OK button.FIRST CODE (SW) NO.SECOND CODE NO.Press and hold Cancelbutton for 4 seconds ormore during backlight lit.In the case of individualsetting per indoor unitIn the case of group totalsetting1. Press and hold Cancel button for4 seconds or more.Service settings menu isdisplayed.2. Select Field Settings in theService Settings menu, andpress Menu/OK button.Field settings screen isdisplayed.3. Highlight the mode, and selectdesired “Mode No.” by using(Up/Down) button.4. In the case of setting per indoorunit during group control (WhenMode No. such as 20 , 21 ,22 , 23 , 25 are selected),highlight the unit No. and select“Indoor unit No.” to be set byusing (Up/Down) button.(In the case of group total setting,this operation is not needed.)In the case of individual settingper indoor unit, current settingsare displayed. And, SECONDCODE NO. “ - ” means nofunction.5. Highlight SECOND CODE NO. ofthe FIRST CODE NO. to bechanged, and select desired“SECOND CODE NO.” by using(Up/Down) button. Multipleidentical mode number settingsare available.In case of setting for all indoorunits in the remote controlgroup, available SECONDCODE NO. is displayed as “ ∗ ”which means it can bechanged.When SECOND CODE NO. isdisplayed as “ - ”, there is nofunction.
