Illustration 7.1: Mounting Template7.1.4 LiftingAlways lift the frequency converter in the dedicated lifting eyes. For all D and E2 (IP00) enclosures, use a bar to avoid bending the lifting holes of thefrequency converter.Illustration 7.2: Recommended lifting method, frame sizes D and E .NB!The lifting bar must be able to handle the weight of the frequency converter. SeeMechanical Dimensions for the weight of the differentframe sizes. Maximum diameter for bar is 2.5 cm (1 inch). The angle from the top of the drive to the lifting cable should be 60 degreesor greater.7 Mechanical Installation - Frame size D, E andF FC 300 Design Guide122 MG.33.BC.02 - VLT® is a registered Danfoss trademark7
