10.9.2 OrderingThe MCF 106 can be purchased built-in from factory or as a seperate option.• Built-in: position 33-37 of the type code. Via these characters it is specified which options are wanted in the upper- and the lower position ofthe MCF 106.• Seperate option: Sales no.130B1130 for non-coated and 130B1230 for coated.A/B Options in C Slot Position: 33-37Upper position in MCF 106 Position: 33-34BB No option in 1st A/B-in-C-slotA0 MCA-101 Profibus DP V1A1 MCA-101 Profibus DP V1A4 MCA-104 DeviceNetA5 MCA-104 DeviceNetA6 MCA-105 CanOpenA7 MCA-105 CanOpenBK MCB-101 General purpose I/OBR MCB-102 Encoder OptionBU MCB-103 Resolver OptionBZ MCB-108 Safety PLC InterfaceMCF 106 A/B in C Option Adaptor Position: 35E MCF 106 A/B in C Option AdaptorLower position in MCF 106 Position: 36-37BB No option in 2nd A/B-in-C-slotAN MCA-121 Ethernet IPBK MCB-101 General purpose I/OBR MCB-102 Encoder OptionBU MCB-103 Resolver OptionBZ MCB-108 Safety PLC InterfaceThe Option Adapter only supports options that have been prepared for this use. The various options will be prepared for this use in the near future. MCA121 EthernetIP will be the first one to be available for MCF 106.For installations in bookstyle enclosures (A2, A3 and B3) the 60 mm mounting kit is used and must be ordered when buying the adaptor as a separateoption.Please see the MCF 106 Instuction Manual, MI38Fxyy, for installation instructions.10.10 Brake ResistorsIn applications where the motor is used as a brake, energy is generated in the motor and send back into the frequency converter. If the energy can notbe transported back to the motor it will increase the voltage in the converter DC-line. In applications with frequent braking and/or high inertia loads thisincrease may lead to an over voltage trip in the converter and finally a shut down. Brake resistors are used to dissipate the excess energy resulting fromthe regenerative braking. The resistor is selected in respect to its ohmic value, its power dissipation rate and its physical size. Danfoss offers a wide varietyof different resistors that are specially designed to our frequency converters. See the sectionControl with brake function for the dimensioning of brakeresistors. Code numbers can be found in the sectionHow to order.10 Options and Accessories FC 300 Design Guide222 MG.33.BC.02 - VLT® is a registered Danfoss trademark10
