Danfoss MCO 305 Operating Instructions Manual

Also see for MCO 305: Design guide Operating instructions Design guide

MCO control terminals are plug connectors with screwterminals. Terminals X55, X56, X57, X58 and X59 areduplicated to be used for both bookstyle and compactframe size.X55 = Encoder 2X56 = Encoder 1X57 = Digital inputsX58 = 24V DC supplyX59 = Digital outputsX62 = MCO CAN BusX60 = Debug connections (RS-485)X62X55X56X57X58X592 X60130BB794.101Illustration 3.5 Location of Terminal BlocksTerminal block 1 is to be used with bookstyle and terminalblock 2 with compact.3.2.3 Terminal overviewTerminalblockTerminal number Descriptive Name Encoder 2(Feedback)X551 +24V Supply2 +8V Supply3 +5V Supply4 GND5 A6 A not7 B8 B not9 Z / Clock10 Z not / Clock not11 DATA12 DATA notTerminalblockTerminal number Descriptive Name Encoder 1(Master)X561 +24V Supply2 N/A3 +5V Supply4 GND5 A6 A not7 B8 B not9 Z / Clock10 Z not / Clock not11 DATA12 DATA notTerminalblockTerminal number Descriptive Name Digital inputsX571 Digital Input2 Digital Input3 Digital Input4 Digital Input5 Digital Input6 Digital Input7 Digital Input8 Digital Input9 Digital Input10 Digital InputTerminalblockTerminal number Descriptive Name SupplyX58 1 +24V Supply2 GNDHow to Install MCO 305 Operating InstructionsMG.33.K3.02 - VLT® is a registered Danfoss trademark 113 3