Product Reference Guide 9Chapter 1IntroductionAbout this GuideThis Product Reference Guide (PRG) is provided for users seeking advanced technicalinformation, including connection, programming, maintenance and specifications. The QuickReference Guide (QRG) and other publications associated with this product are downloadablefree of charge from the website listed on the back cover of this manual.Typically, units are factory-programmed for the most common terminal and communicationssettings. If you need to modify any programmable settings, custom configuration can beaccomplished by scanning the programming barcodes within this guide.Programming can alternatively be performed using the Datalogic Aladdin™ Configurationapplication which is downloadable from the Datalogic website listed on the back cover of thismanual. This multi-platform utility program allows device configuration using a PC. Itcommunicates to the device using a serial or USB cable and can also create configurationbarcodes to print.Manual OverviewChapter 1, Introduction provides a product overview, unpacking instructions, and cableconnection information.Chapter 2, Getting Started presents information about unpacking and setting up the reader.Chapter 4, Interfaces consists of interface configuration barcodes and details.Chapter 3, General Features includes programming barcodes for selecting common features forthe reader and general use barcodes to customize how the data is transmitted to the host device.Chapter 5, RS-232 ONLY Interface supplies information about setting up the reader for RS-232operation.Chapter 6, RS-232/USB-Com Interfaces features information about options involving both the RS-232 and USB-Com interfaces.Chapter 7, Keyboard Interface discusses how to set up the reader for Keyboard Wedge operation.Chapter 8, USB-OEM Interface explains how to set the reader up for USB operation.Chapter 9, IBM 46XX Interface is a resource for setting up an IBM interface.Chapter 10, Wand Emulation Interface explains how to set the reader up for Wand EmulationInterface.
