TroubleshootingThis chapter gives you different troubleshooting steps.This chapter includes:Redistributing tonerTips for avoiding paper curlsTips for avoiding paper jamsClearing paper jamsUnderstanding display messagesSolving other problemsRedistributing tonerWhen the toner cartridge is near the end of its life:White streaks or light printing occurs.Prepare new cartridge appears on the display.The Status LED blinks red.If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. Insome cases, white streaks or light printing will still occur even after you have redistributed the toner.1. Open the front door.2. Pull the toner cartridge out.3. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge.If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water setstoner into fabric.Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touchingthis area.4. Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine.Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into thecorrect position until it locks into place completely.