Dell 1133 Mono Laser User Manual

Also see for 1133 Mono Laser: Service manual Product description

Contents

Media and trayThis chapter provides information on how to load originals and print media into your machine.This chapter includes:Preparing originalsLoading originalsSelecting print mediaChanging the tray sizeLoading paper in the trayPrinting on special mediaSetting the paper size and typeUsing the output supportPreparing originalsDo not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches).Do not attempt to load the following types of paper, in order to prevent paper jam, low print quality, andmachine damage.Carbon-paper or carbon-backed paperCoated paperOnion skin or thin paperWrinkled or creased paperCurled or rolled paperTorn paperRemove all staples and paper clips before loading.Make sure any glue, ink, or correction fluid on the paper is completely dry before loading.Do not load originals that include different sizes or weights of paper.Do not load booklets, pamphlets, transparencies, or documents with other unusual characteristics.Loading originalsYou can use the scanner glass to load an original for copying and scanning.1. Lift and open the scanner lid.2. Place the original face down on the scanner glass. And align it with the registration guide at the top left corner ofthe glass.