1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Machine Setup appears and press OK.4. Press the left/right arrow until Toner Save appears and press OK.5. Press the left/right arrow until On appears and press OK.6. Press Stop/Clear ( ) to return to ready mode.When PC-printing, you can also turn on or off toner save mode in the printer properties.Using the power saving featureWhen you are not using the machine for a while, use this feature to save power.1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Machine Setup appears and press OK.4. Press the left/right arrow until Power Save appears and press OK.5. Press the left/right arrow to select the time you want.6. Press OK to save the selection.7. Press Stop/Clear ( ) to return to ready mode.Setting the default tray and paperYou can select the tray and paper you would like to keep using for printing job.In the control panelSetting the paper size1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Size appears and press OK.5. Press the left/right arrow to select the paper tray you want and press OK.6. Press the left/right arrow to select the paper size you want.7. Press OK to save the selection.8. Press Stop/Clear ( ) to return to ready mode.Setting the paper type1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Type appears and press OK.5. Press the left/right arrow to select the paper tray you want and press OK.6. Press the left/right arrow to select the paper type you want.7. Press OK to save the selection.8. Press Stop/Clear ( ) to return to ready mode.Setting the paper source1. Press Menu ( ) on the control panel.2. Press the left/right arrow until System Setup appears and press OK.3. Press the left/right arrow until Paper Setup appears and press OK.4. Press the left/right arrow until Paper Source appears and press OK.5. Press the left/right arrow to select the paper tray you want.6. Press OK to save the selection.7. Press Stop/Clear ( ) to return to ready mode.In the computerWindows1. Click the Windows Start menu.