Adding and Replacing Parts 149Replacing Mini-CardNOTICE: The connectors are keyed to ensure correct insertion. If you feelresistance, check the connectors on the card and on the system board, and realignthe card.NOTICE: To avoid damage to the Mini-card, never place cables under the card.1 Insert the card connector into the system board connector at a 45-degree angle.2 Press the other end of the card down into the slot on the system boarduntil the card clicks into place.3 Replace the securing screw.4 Connect the cables to the Mini-Card, ensuring that you route the cablescorrectly.NOTE: For more specific information about which cable to connect to whichconnector, see the documentation that came with your Mini Card.5 Secure unused antenna cables in the protective mylar sleeve.6 Replace the cover and tighten the eight captive screws.Flash Cache ModuleThe Flash Cache Module or FCM, is an internal memory card that helpsimprove the performance of your computer. The FCM card is also known asIntel Turbo Memory and the Intel Flash Cache Logic Chip Mini-card.NOTE: This card is only compatible with the Microsoft Windows Vista™ operatingsystem and Intel platform.If you ordered an FCM with your computer, it is already installed.Removing the FCM1 Follow the procedures in "Before You Begin" on page 133.2 Turn the computer over and remove the cover on the Mini Cardcompartment.3 Ground yourself by touching one of the metal connectors on the back ofthe computer.NOTE: If you leave the area, ground yourself again when you return to the computer.
