Dell 2145cn User Manual

Also see for 2145cn: Service manual

Contents

Dell 2145cn User Manual Manual pdf 22 page image

22 | Getting startedScan power save modeScan Power Save mode allows you to save power by turning off thescan lamp. The scan lamp under the scanner glass automatically turnsoff when it is not in actual use to reduce power consumption andextends the life of the lamp. The lamp automatically wakes up aftersome warm-up time when you start scanning.You can set the length of time for which the scan lamp waits after a scanjob is completed before it switches to the power save mode.1. Press Menu ( ) until System Setup appears on the bottom line ofthe display and press OK.2. Press OK when Machine Setup appears.3. Press the left/right arrow until Scan PWR Save appears and pressOK.4. Press the left/right arrow until the time setting you want appears andpress OK.5. Press Stop/Clear ( ) to return to Ready mode.Setting print job timeoutYou can set the amount of time a single print job is active before it mustprint.The printer handles incoming data as a single job if it comes in withinthe specified time. When an error occurs while processing data from thecomputer and the data flow stops, the printer waits the specified time andthen cancels printing if data flow does not resume.1. Press Menu ( ) until System Setup appears on the bottom line of thedisplay and press OK.2. Press OK when Machine Setup appears.3. Press the left/right arrow until Job Timeout appears and press OK.4. Press the left/right arrow until the time setting you want appears andpress OK.5. Press Stop/Clear ( ) to return to Ready mode.Auto continueThis is the option to set the printer to continue printing or not, in case thepaper size you have set and the paper within the tray mismatches.1. Press Menu ( ) until System Setup appears on the bottom line of thedisplay and press OK.2. Press OK when Machine Setup appears.3. Press the left/right arrow until Auto Continue appears and press OK.4. Press the left/right arrow until the binding option you want appears.• On: Automatically prints after set time passes, when the paper sizemismatches the tray paper size.• Off: Waits until you press Black Start ( ) or Color Start ( ) onthe control panel, when the paper size mismatches the tray papersize.5. Press OK to save your selection.6. Press Stop/Clear ( ) to return to Ready mode.Changing the font settingYour printer has preset the font for your region or country.If you want to change the font or set the font for special condition such asthe DOS environment, you can change the font setting as follows:1. Ensure that you have installed the printer driver from the providedDrivers and Utiltiies CD.2. Click Start → All Programs → DELL → DELL Printers → Dell 2145cnColor Laser MFP → Printer Setting Utility.You can also click Printer Setting Utility on the status bar in Mac OS X(or Notification Area in Linux).3. Click Printer Setting Utility.4. Click Emulation.5. Confirm if PCL is selected in Emulation Setting.6. Click Setting.7. Select your preferred font in the Symbol set list.8. Click Apply.Following information shows the proper font list for correspondinglanguages.• Russian: CP866, ISO 8859/5 Latin Cyrillic• Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only)• Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek• Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864,Farsi, ISO 8859/6 Latin Arabic• OCR : OCR-A, OCR-B