68 | TroubleshootingIn the paper exit areaIf paper is jammed in the paper exit area, follow the next steps to releasethe jammed paper.1. If a long portion of the paper is visible, pull it straight out. Open and closethe front cover firmly. The printer will resume printing.If you cannot find the jammed paper, or if there is any resistanceremoving the paper, stop pulling and go to step 2.2. Open the scan unit.3. Open the cover of reverse unit using the handle on it and carefully takethe jammed paper out of the printer.If there is any resistance removing the paper or difficulty picking upjammed paper, stop pulling and turn the release knob to the direction asshown to remove the misfed paper.4. Close the cover of reverse unit.5. Lowering down the scan unit gently and slowly until it is completelyclosed. Ensure that it is securely latched.Be careful not to pinch your fingers!If you cannot find the jammed paper, or if there is any resistanceremoving the paper, stop pulling and go to step 6.6. Open the rear cover and carefully take the jammed paper out of theprinter.7. Close the rear cover.If the scan unit is not completely closed, the printer will notoperate.
