Understanding the Tool Box Menus 269Date & TimePurpose:To specify the date and time.Values:Low Toner AlertMsgOn* Shows the alert message when the toneris low.Off Does not show the alert message whenthe toner is low.Panel Language English* Sets the language to be used on theoperator panel.FrenchItalianGermanSpanishDanishDutchNorwegianSwedishApply New Settings After you change the settings, click thisbutton to apply the changes.Restart printer to apply new settings Click this button to apply the changes.*1 Enter 3 to put the printer in the power saver timer mode 3 minutes after it finishes ajob. This uses much less energy, but requires more warm-up time for the printer.Enter 3 if your printer shares an electrical circuit with room lighting and you noticelights flickering.Select a high value if your printer is in constant use. Under most circumstances, thiskeeps the printer ready to operate with minimum warm-up time. Select a valuebetween 1 and 30 minutes for the power saver timer mode if you want a balancebetween energy consumption and a shorter warm-up period.The printer automatically returns to the standby mode from the power saver timermode when it receives data from the computer. You can also return the printer to thestandby mode by pressing any button on the operator panel.*2 This item is available only when the optional 250-sheet feeder is installed.*3 This item is available only for Dell 2150cdn Color Printer.*4 This item is available only when the optional 512 MB memory module is installed.
