314 Understanding the Printer MenusManual Color Registration Adjustments are required when the printer is initiallyinstalled and after the printer is moved.NOTE: The Color Reg Adjust feature can be configured when AutoReg Adjust is set to Off.Values:NOTE: Ensure that you remove the paper from the single sheet feeder beforeperforming Auto Correct.Clean DeveloperPurpose:To stir the toner in a new toner cartridge.Values:Auto Correct Are You Sure? Press the (Set) button to automaticallyperform color registration correction.ColorRegChartAre You Sure? Press the (Set) button to print a colorregistration chart. The color registration chartprints a lattice pattern of yellow, magenta, andcyan lines. On the chart, find the values on theright side that are next to the line that isperfectly straight for each of the three colors. Ifthe value for the this line is 0, color registrationadjustment is not required. If the value for thisline is any value other than 0, specify theadjustment values.Enter Number Enter (LY,LM, LC)-9 to +9 Sets lateral (perpendicular to paper feeddirection) and process (paper feed direction)color adjustment values individually forYellow, Magenta, and Cyan. Enter a number inorder of lateral adjustment (left), lateraladjustment (right), and process adjustment.Press the (Set) button to save all the settings.Enter (RY,RM, RC)-9 to +9Enter (PY,PM, PC)-9 to +9Are You Sure? Press the (Set) button to stir the toner in a new toner cartridge.
