82 Connecting Your PrinterTo connect the printer to the network, connect one end of an Ethernet cable intothe Ethernet port on the rear of the printer, and the other end to a LAN drop orhub. To setup a wireless connection, insert the wireless adapter into the wirelessadapter socket on the back of the printer.For a wireless connection, see "Installing the Optional Wireless Adapter."NOTE: To use the wireless adapter, be sure to disconnect the network cable.Turning on the PrinterCAUTION: Do not use extension cords or power strips.CAUTION: The printer should not be plugged into a UPS (Uninterruptible PowerSupply) system.1 Connect the power cable to the power connector on the rear of the printer,and then to a power source.2 Turn on the printer. When the printer is connected via a USB cable, the USBdriver is automatically installed.1 Ethernet port
