Troubleshooting Guide 435FILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY• Auger mark• Wrinkled/Stained paper• Damage on the leading edge of paperThe output is too lightAction Yes No1 The toner cartridges may be low or need to bereplaced. Confirm the amount of toner left ineach toner cartridge.a Check the toner level in the Status tab in theStatus Monitor.b Replace the toner cartridges as necessary.Does this solve your problem?The task iscomplete.Go to action 2.2 If you are using non-Dell brand toner cartridges,disable the Non-Dell Toner option.a Launch the Tool Box, and click Non-DellToner on the Printer Maintenance tab.b Ensure that the On check box is not selected.Does this solve your problem?The task iscomplete.Go to action 3.3 Disable the Toner Saving Mode in the printerdriver.a On the Advanced tab, ensure that the TonerSaving Mode check box is not selected.Does this solve your problem?The task iscomplete.Go to action 4.
