User authentication for network scanningTo send an email, or Network, you need to register local or network authorized users using Embedded WebService .If user authentication is activated, only authorized users in local or server DB (LDAP, Kerberos) cansend scan data to network (Email, Network) using the machine.To use user authentication for network scanning, you need to register network or local authenticationconfiguration using Embedded Web Service .User authentication has 3 types as no authentication (Default), network authentication and localAuthentication.Registering authorized usersEnter your machine's IP address as the URL in a browser and click Go to access the web site of yourmachine.1.Click Email Settings Authentication .2.Select User Authentication .3.Enter your auth ID, password.4.You need to enter the registered user ID and password in the machine when you start scanning toemail from the control panel.Click Submit .5.Setting up an e-mail accountTo scan and send an image as an email attachment, you need to set up network parameters usingEmbedded Web Service .Enter your machine's IP address as the URL in a browser and click Go to access the web site of yourmachine.1.Click Email Settings SMTP Server Setup .2.Enter the server port number, from 1 to 65535.3.The default port number is 25.Put a check mark in SMTP Requires Authentication to require authentication.4.Enter your SMTP Server Login Name , SMTP Server Password , SMTP Server ConnectionTimeout , and Maximum Message Size .5.Click Submit .6.
