Copying ProblemsCondition Suggested solutionsCopies are too lightor too dark.Use the Contrast menu to darken or lighten thebackground of the copies.Smears, lines,marks or spots appear oncopies.If defects are on the original, select CopyContrast to lighten the background of your copies.If no defects are on the original, clean the documentglass and underside of the document cover. See "Cleaningthe scanner".Copy image isskewed.Ensure that the original is positioned correctly ondocument glass.Check that the copy paper is loaded correctly.Blank copies printout.Ensure that the original is face down on the documentglass or face up in the DADFImage rubs off thecopy easily.Replace the paper in the paper tray with paper froma new package.In high humidity areas, do not leave paper in theprinter for the extended periods of time.Frequent copy paperjams occurs.Fan the stack of paper, then turn it over in the papertray. Replace the paper in the tray with a fresh supply. Ifnecessary, check/adjust the paper guides.Ensure that the paper is the proper paper weight. 75g/m2 (20 lb) bond paper is recommended.Check for copy paper or pieces of copy paperremaining in the printer after a paper jam has beencleared.Fewer copies fromthe toner cartridge thanexpected prints out.Your originals may contain pictures, solids or heavylines. For example, your originals may be forms,newsletters, books or other documents that use moretoner.The document cover may be left open while copiesare being made.Scanning Problems
