132Setting Copy OptionsThe Manual Copy menus on the operator panel let you customize all the basic copy options;number of copies, copy size, contrast and image quality. Set the following options for thecurrent copy job before pressing Start ( ) to make copies.NOTE: If you press AC while you set the copy options, all of the options you have set for the currentcopy job will be canceled and return to their default status. Or, they automatically return to theirdefault status after copying.Number of CopiesYou can select the number of copies from 1 to 500.1 Press Copy from the home screen.2 Enter the value you want using the number keypad.3 Press Start ( ). (on the touch screen or the operator panel)You can cancel the copy job at any time. Press and the copying will stop.Enlarge/Reduce CopyYou can reduce or enlarge the size of a copied image, from 25 percent to 400 percent, when youcopy original documents from the document glass or the DADF. Note that the zoom rateavailable is different depending on the document loading method.NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.To select from the predefined copy sizes:1 Press Copy from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Zoom.4 Press the left/right arrows to select the zoom rate you want.You can select from 25~400%.
