176Setting Up a Network-connected PrinterYou must set up the network protocols on the printer to use it as your network printer.Protocols can be set up by the following two methods:1 Via Network Administration ProgramsYou can configure your printer’s print server settings and manage it via the following programs:• Set IP Address Utility: A utility program allowing you to find your network printer andmanually configure the addresses for use with the TCP/IP protocol.• Embedded Web Service: A web server embedded to your network print server, whichallows you to:Configure the network parameters necessary for the printer to connect to various networkenvironments.2 Via the Operator PanelYou can configure the basic network parameters through the printer’s operator panel. Use theprinter operator panel to do the following:• Print a Network Configuration Page• Configure TCP/IP• Configure EtherTalk• Configure a Wireless networkConfiguring Network Parameters on the Operator PanelItem RequirementsNetwork Interface • 10/100 Base-TX• 802.11 b/g Wireless LAN (Optional)Network Operating System • Windows: WinNT4.0/2000/XP(32/64bits)/Vista(32/64bits)/2003Server(32/64bits)/2008 Server(32/64bits)/7/ Server 2008 R2• Novell NetWare NDPS services via TCP/IP & IPP on 5.x, 6.x,• Mac OS 10.3 ~ 10.6• Various Linux OS• UNIX(TBD, SUN 8,9,10, HP-UX 11i, IBM AIX 5.2, 5.3)• Citrix, Windows Terminal Server, SAP
