137Clone CopyingThis special copy mode can be applied when you load a document using only the documentglass. If a document is detected on the DADF, the Clone copying feature does not work.NOTE: You cannot adjust the copy size using the Zoom menu while making a clone copy.To make the Clone copying:1 Place a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".2 Press Copy from the home screen.3 Press the left/right arrows to select Clone Copy.4 If necessary, customize the copy settings including number of copies, contrast, originaltype, and original size by pressing Options. See "Setting Copy Options".5 Press to go to the upper menu.6 Press Start ( ). (on the touch screen or the operator panel)NOTE: You can cancel the copy job at any time. Press , and the copying will stop.Poster CopyingThis special copy mode can be applied when you load a document using only the documentglass. If a document is detected in the DADF, the Poster copying feature does not work.NOTE: You cannot adjust the copy size using the Zoom menu button for making a poster.To make the Poster copying:1 Place a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".2 Press Copy from the home screen.3 Press the left/right arrows to select Poster Copy.4 If necessary, customize the copy settings including number of copies, contrast, originaltype, and original size by pressing Options. See "Setting Copy Options".5 Press to go to the upper menu.6 Press Start ( ). (on the touch screen or the operator panel)NOTE: You can cancel the copy job at any time. Press , and the copying will stop.Your original document is divided into 9 portions. Each portion is scanned and printedone by one in the following order:
