1366 If necessary, customize the copy settings including number of copies, contrast, originalsize, and original type. See "Setting Copy Options".7 Press to go to the upper menu.8 Press Start ( ). (on the touch screen or the operator panel)NOTE: You can cancel the copy job at any time. Press , and the copying will stop.Collate CopyingThis special copy mode can be applied when you load a document using only the DADF.To make the Collate copying:1 Load the document(s) face up with top edge in first into the DADF.ORPlace a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".2 Press Copy from the home screen.3 Press the left/right arrows to select Collate Copy.4 If necessary, customize the copy settings including number of copies, contrast, originaltype, and original size by pressing Options. See "Setting Copy Options".5 Press to go to the upper menu.6 Press Start ( ). (on the touch screen or the operator panel)NOTE: You can cancel the copy job at any time. Press , and the copying will stop.Auto Fit CopyingThis special copy mode can be applied when you load a document using only the documentglass. If a document is detected in the DADF, the Auto Fit does not work.. NOTE: You cannot adjust the copy size using the Zoom menu while the Auto Fit copying is enabled.To make the Auto Fit copying:1 Place a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".2 Press Copy from the home screen.3 Press the left/right arrows to select Auto Fit Copy.4 If necessary, customize the copy settings including number of copies, contrast, originaltype, and original size by pressing Options. See "Setting Copy Options".5 Press to go to the upper menu.6 Press Start ( ). (on the touch screen or the operator panel)NOTE: You can cancel the copy job at any time. Press , and the copying will stop.A
