27Internal FontsThe Dell 2355dn Laser MFP Laser printer supports the PCL and PS fonts.If you want to see the PCL and PS font list, follow these steps:Printing the PCL Font list1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Reports.4 Press the up/down arrows to select PCL Font List.5 PCL Font list pages print out.Printing the PS3 Font list1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Report.4 Press the up/down arrows to select PS Font List.5 PS Font list pages print out.NOTE: You can add additional PCL fonts and PS fonts in Printer Settings Utility. See "Printer SettingsUtility".Setting up the hardwareThis section shows the steps to set up the hardware which is explained in the Placemat. Makesure you read the Placemat and complete the following steps:1 Select a stable location.Select a level, stable place with adequate space for air circulation. Allow extra space toopen covers and trays.The area should be well-ventilated and away from direct sunlight or sources of heat, cold,and humidity. Do not set the machine close to the edge of your desk or table.
