103Setting the paper feeding flow1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Tray Behavior.4 Press the up/down arrows to select Configure MPF.5 Press the left/right arrows to select the paper tray you are using.• Tray Mode: When sending a print job from the computer, the printer uses paper in thetray which you have already set in Printer properties. In this mode the MPF is treated asanother paper tray. Instead of treating MPF as first preference paper source, printerpulls paper from the tray that matches the size and type. The first preference goes to thedefault source.• Bypass Mode: When sending a print job from the computer and the MPF is filled withpaper, the printer uses the paper in the MPF first. In this mode the printer pulls the paperfrom MPF first unless it is closed or empty. MPF gets the highest priority and pullswhatever media present in the MPF. Bypass Mode is set as a default setting.6 Press the home icon ( ) to return to the Standby mode.Setting the paper auto feedingWhen the paper is mismatched, the machine waits for a while (about few seconds) and startsprinting automatically even if the paper mismatches.1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Tray Behavior.4 Press the up/down arrows to select the Auto Continue.5 Press the left/right arrows to select the On you want to use.6 Press the home icon ( ) to return to the Standby mode.
