44Changing the Display LanguageTo change the displayed language that the operator panel displays, follow these steps:1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Initial Setup.4 Press the up/down arrows to Language.5 Press the left/right arrows to select the language you want.6 Press the home icon ( ) to return to the Standby mode.Selecting CountryTo change the country that appears on the operator panel, follow these steps:1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Initial Setup.4 Press the up/down arrows to select Select Country.5 Press the up/down arrows to select the country you want.6 Press the home icon ( ) to return to the Standby mode.Power Save ModeThe Power Save mode enables your printer to reduce power consumption when it is not in actualuse. You can enable this mode by selecting the duration for which the printer waits after a job isprinted before it switches to a reduced power state.1 Press Setup Machine Setup from the home screen.2 Press the Next ( ) button.3 Press the up/down arrows to select Initial Setup.4 Press the up/down arrows to select Print Power Save.5 Press the left/right arrows to select the time settings you want.6 Press the home icon ( ) to return to the Standby mode.NOTE: Available setting range is from 5 min. to 120 min. (factory default : 30 min.) and you canalso access this mode from the EWS (Printer Settings Print Settings Setup Menu andselect Print Power Save).
