254Configuring Printer PropertiesUsing the properties window provided by the Printers configuration, you can change the variousproperties for your machine as a printer.1 Open the Unified Driver Configurator.If necessary, switch to Printers configuration.2 Select your printer on the available printers list and click Properties.3 The Printer Properties window opens.The following five tabs display at the top of the window:• General: allows you to change the printer location and name. The name entered in thistab displays on the printer list in Printers configuration.• Connection: allows you to view or select another port. If you change the printer portfrom USB to parallel or vice versa while in use, you must re-configure the printer portin this tab.• Driver: allows you to view or select another printer driver. By clicking Options, youcan set the default device options.• Jobs: shows the list of print jobs. Click Cancel Job to cancel the selected job and selectthe Show completed jobs check box to see previous jobs on the job list.• Classes: shows the class that your printer is in. Click Add to Class to add your printerto a specific class or click Remove from Class to remove the printer from the selectedclass.4 Click OK to apply the changes and close the Printer Properties Window.
