63Network InstallationAssigning an IP AddressBefore using the printer on the network, you must set an IP address, subnet mask, and gateway forthe printer. If you want DHCP or BOOTP to automatically set the IP address, a DHCP or BOOTPserver must exist on the network.If the network is using DHCP/BOOTP, an IP address is automatically assigned after connectingthe network cable to the printer. In case no DHCP or BOOTP the printer will automatically assigna legacy IP address 192.0.0192 or local link address 169.254.xxx.xxx.To configure the IP address manually, you can use the supplied "Installing Software inMicrosoft® Windows® Operating System" CD. Print the Configuration page of the printer to seethe current network configuration and MAC address. You will need this information to configurethe printer for the network.1 Ensure that the printer is connected to your network and powered on. Close all programs.2 Insert the "Installing Software in Microsoft® Windows® Operating System" CD.NOTE: For Windows Vista/Windows 7/Server 2008 R2, click Continue when the UserAccount Control screen appears.NOTE: If user has disabled auto continue, then please open setup.exe from CD root folder.3 Select Set IP Address. The list of printers is available on the network displays.4 Select the printer you want to assign an MAC address to. The printer’s MAC address can befound on the Configuration page for the printer.
