Load only one size and type of print media single print job. To he best possible print quality, use only high-quality print media designed for usein laser printers. For more guidelines on print med "Print Media Guidelines(See 9.)." Do not add or remove print media when there i print media in the multipurposefeeder or when the multifunction p rinting from the multipurpose feeder. This mayresult in a paper j Print media should be loaded with mended print side down and the top of the printmedia going into the pose feeder first. Do not place objects on the multipurpos lso, avoid pressing down or applyingexcessive force on it. Do not remove while a job is printing from the multipurpose feeder or Printing isdisplayed on the operator panel. result in a paper jam.s on the multipurpose feeder identify how to load the multipurpos with paper, and how toturn an envelope for printing.Linking TraysTray linking allows you to load e size and type of print media in multiple sources. Themultifunctio r automatically links the source/trays and will use the first tray un runs out,then switch to the linked tray.If you load the same size print media in each tray, the print media is the same type in orderto link the trays.When the selected re loaded with the same size and type of print media, select the PaperType settings in the Tray Settings for each source.To disable ing, set the Paper Type t que value in each one of the trays. If all trays do nothave the sam f print media when linked, you could mistakenly print a job on the wr er type.Using the DuplexDuplex printing (or two-sided printing) a o print on both sides of a sheet of paper. For sizesthat are acc for duplex printing, see "Print Media S Support(See 9.)." Duplex printing is onlyavailable when the optio exer is installed on the multifunction printer. For information on hotall the duplexer, see "Installing a D(See 8.)."Using Booklet Print
