Do not overfill dia sources.Do not force pri into the multipurpose feeder when you load it;otherwise, it may sk ckle.Remove any curled print media from sources.Load the recommended print side correctly for the type of ediayou are using. See "Loading Pr n Standard and OptionalTrays(See 10.)" for more information.Turn the print media over or around and try printi to see iffeeding improves.Do not mix print media types.Do not mix reams of print media.R e top and bottom sheets of a ream before loading the printmedia.Load a print media so hen it is empty.Wipe the rollers in the trays or multipurpose feeder with a cloththat slight ned with water.Envelope misfeeds ormultiple feeds occur.Reduce the envelopes in the stack.P aks in unexpectedplaces.Check the Time-O(See 13.) in the System Settings menu. Ince setting.Jo from the wrong sourceor on the wrong printmedia.Chec Paper Type in the ay Settings menu on the printeroperator panel and in t er driver.Print media does not stackneatly in the output bin.print media stack over in the tray or multipurpose feeder.Multifunction printer uplexpages.Ensure 2 Sided selected in both the PCL (Printer ControlLanguage) menu on the printer operator panel and in the printeEnsure you have enough print memory installed.Print Quality Problems
