NOTE: In case of either one, w configure the languages setting, the information, whichis register e device, is initialized.Setting the Machine IDIn most , you are required by law to indicate your fax number on any fax you The MachineID, containing your telephone number and name or company ill be printed at the top of eachpage sent from your multifuncti1. Press >SETUP appears, and the .2. Press until >Admin Menu appears, and then press .3. Press until >Fax Settings appears, and then press .4. Press until >G3ID appears, and then press .5. Enter your fax number using the num d.NOTE: If you make a mistake while entering number to delete the last digit.6. Press the number on the display is correct.7. Press unt >Send Header Name appears, a press8. Enter your name or company name using the number keypad.You can enter alphanumeric characters u number keypad, including special symbolsby pressing the 0 button.Fo s on how to use the number keypad to enter alphanumeric characters, s Usingthe Number Keypad to Enter Chara(See 18.)".9. Press when the name on the display is correct.10. Press Cancel to return to the st de.sing the Number Keypad to Enter CharactersAs you perform various tasks, you may need r names and numbers. For example, when youset up your multifunction , you enter your name or your company's name and telephonenumber. Wh store speed dial or group dial numbers, you may also need to enter t spondingnames.
